At Fusion™ Mineral Paint, we understand your passion for painting and the joy that comes with creating beautiful masterpieces. We take pride in our paint formula, known for its exceptional adhesive properties and flawless finishes. However, we’ve heard your feedback about a pesky issue – stuck lids. Let’s address this together!
The Science Behind the Stuck Lid
Fusion™ Mineral Paint boasts remarkable adhesive qualities with it’s 100% industrial-grade acrylic resin, making it ideal for various surfaces. Unfortunately, this same adhesive power can cause lids to stick if there’s any residual paint left on the threads. Hand-filled containers sometimes result in a slight tilt during lid placement, leaving tiny traces of paint behind. But fret not, we’ve implemented improvements in our production process to ensure consistent lid application and minimize this issue moving forward.
Say Goodbye Stuck Lids:
- Cleanliness is Key: Before sealing your Fusion paint container, wipe off any excess paint from the lid’s tracks. This simple step prevents residue buildup, keeping lids from sticking.
- The Hot Water Trick: If you encounter a stubborn lid, run it under hot water for 30 seconds to 1 minute. The heat loosens the lid, making it easier to open.
- Heat it Up: Use a hair dryer around the lid for a few seconds. The hot air helps release the lid effortlessly.
- Whack it: If those options don’t work tighten the lid and turning it upside down to give it a smooth whack. It will loosen the sealed, fused paint allowing you to open the lids easily.
Smooth Fusion Paint Experience
With these simple tips, you can say goodbye to stuck lids and lid-locking frustrations and embrace the joy of painting with Fusion™ Mineral Paint. We appreciate your support and feedback as we continually strive to enhance our products for you, our valued customers.
See the full video showing you how to get your lids unstuck!
Happy Painting!