Ultra Grip • Fusion™ Mineral Paint
Menu

PRODUCT DETAILS

Have a really tricky surface to paint? Our Ultra Grip allows for Fusion™ to adhere to surfaces that are typically not for painting such as a lacquered surface, melamine, thermofoil or laminate. Non toxic, waterbased ultra grip that makes painting the impossible, possible!



Application Tool Staalmeester Microfiber roller, or fine synthetic brush
Location Interior/Exterior
Re-coat Time 2-12 hrs
Dry Time 2-12 hrs
Top Coat Fusion Mineral Paint
Clean Up Water
Coverage 70 sq.ft.
Finish/Sheen Dries Clear
Recommended Uses If an area laces when applying the first coat of paint, Ultra Grip should help with the adhesion on these surfaces.
Can Be Applied To Melamine, Thermofoil or shiny slick surfaces with carved details that can not be scuff sanded. Non-oil, no wax surfaces.
Can Be Painted Over Yes
How to Prep Apply to a clean, wax or oil free surface
Cure Time 21 Days
Maintenance/ Cleaning Clean as required, mild soap and water

 

FAQs

How do I use Ultra Grip™?

You can apply Ultra Grip™ using a brush, a roller, an applicator pad, or a sponge. No matter what you apply with, be aware that Ultra Grip™ will hold texture and that texture can show through to the final layer of Fusion Mineral Paint. To avoid this, ensure you apply Ultra Grip™ in a very thin layer. The product is milky in the bottle, but should be clear when applied. Let it dry 12-24 hours before painting for best results, but you can paint after 2 hours of application.

Check this post for more information: https://fusionmineralpaint.com/super-slick-surface-paint-anyway/

When do I use Ultra Grip™?

Ultra Grip™ can be used to make the impossible possible. Use it on surfaces that you can’t sand, such as thermofoil or some laminates, or even really detailed surfaces that are too difficult to scuff. A good way to tell if you need Ultra Grip™ is to paint a test area with just Fusion. If the paint laces or beads, you likely need Ultra Grip™. BLOG

Will it dry clear?

Yes it will! This means that if you have a piece you want to distress to show the original finish, but it is too difficult to sand, you can use Ultra Grip™ with no worries.

Is Ultra Grip™ a primer?

Ultra Grip™ is an adhesion primer, so it helps Fusion stick to slippery surfaces. It is not a transition primer, for painting over dark or bright colours. For that we recommend Sterling or another light grey. Ultra Grip™ will also not stop bleed through from tannins or rust. For that, we recommend Zinsser BIN shellac-based primer.
 

DIRECTIONS

HOW TO USE IT

Makes painting the impossible, possible! That’s right, those super slick surfaces like melamine or thermofoil Ikea cabinets, we’ve got you covered with Ultra Grip! It literally grips to the surface, allowing for Fusion Mineral Paint to fuse to the surface.

Apply a very thin coat using a Staalmeester Microfiber roller, or a fine quality synthetic brush.

Because Ultra Grip is so strong, it can hold more texture, apply thin and sparingly with a very fine roller like our Staalmeester rollers. If you must use a brush, ensure it is a fine synthetic fibre and the coats are ultra thin. It dries very quickly so do not brush back and forth or you will create texture.

Allow to dry for 12 hours before applying subsequent coats of Fusion™ colours. Clean up with water.

 

How do you know if you need Ultra Grip?

Do a test- paint a small inconspicuous area of your project, if you see lacing, that is paint separating. As long as you followed all the proper prep / cleaning steps and you experience this, then you will need Ultra Grip. If you didn’t clean, this could mean there is a wax on your piece, trying cleaning it with Odourless solvent first.
 

How do you know if you need more than 1 coat?

If when applying Ultra Grip it starts to separate or lace on the surface, just allow it to dry and apply another coat. Your second coat should ensure excellent surface adhesion.

Applying a smooth coat of Ultra Grip™ will create little tiny, (invisible to the naked eye), peaks and valleys in your smooth surface, so it creates ‘tooth’ for the paint to adhere to.

We like to think that Ultra Grip™ makes the impossible to paint possible.
 

DID YOU KNOW?

  • This product is made with industrial strength acrylic resin and is super adhesive tough and hard wearing.
  • This product is safe to use indoors.
  • This product is non-toxic and contain’s no VOC’s

 

WHAT WILL IT LOOK LIKE?

Ultra grip is white in the wet state but dries to a clear film. If painting over a darker surface, it may have a blue tinge to it, but it will dry clear.

 

CURE TIME

You can re-coat after 2 hours if you need more than one coat of Ultra Grip.

Painting over Ultra Grip should be done 12-24hrs after for the best results.
 

WHAT ELSE CAN IT BE USED FOR?

Ultra Grip / Bonding Agent is used for Milk Paint when painting a shiny surface. It is added into the mixed Milk Paint for the first coat to insure adhesion.

You can create texture with this product! So try experimenting with it if you love to create textured finishes.

Ultra Grip can also be used in the application of decoupage! Apply a coat of Ultra Grip to dry overnight, place your decoupage to the surface and use a hot iron over some wax paper. This reconstitutes the Ultra Grip and causes a strong bond with the decoupage. This insures no wrinkle and bubbles which you can sometimes get when decoupaging!

 

COLOURS

NO COLOURS AVAILABLE.

 

From Our Tutorials:

From Our Blog:

  • Super Slick Surface? Paint it anyway!



    Or how to make the impossible, possible using Ultra Grip.



    Have you got a picture frame that would make the perfect chalk board? Go ahead –  paint the glass!

     

    Do you have sli…
    Read More