Crackled Texture • Fusion Mineral Paint
Menu

PRODUCT DETAILS

Get that gorgeous, aged, cracked paint look with ease using Fusion™ Crackled Texture. Simply apply as a base coat, then paint over top. Crackled Texture is made of the same high quality ingredients as Fusion Mineral Paint™ and will stick to anything Fusion™ does.

For larger, thicker cracks, apply a thick layer of Crackled Texture. For smaller details, brush the product into a thin layer. This base layer creates depth with a crackled look. Great for creating an instant aged aesthetic.

Product is white but can be painted over after it dries. This differs from our previous crackle product, as it is applied as is, and this product itself actually crackles, then you can paint (or wax etc.) over top of it. It also creates a more defined, deeper crackle.

Application Tool  Poured on, spatula to even and smooth
Location  Interior/Exterior
Re-coat Time  1-8 hours
Dry Time  1 -8 hours
Top Coat  Not required. Can add any top coat desired for effect
Clean Up  Water
Coverage  25 sq.ft.
Finish/Sheen  Matte
Recommended Uses  Crackled effect for decorative finishes, wood surfaces, previously painted surfaces. 
Can Be Applied To  Any Fusion Mineral Paint colour. Non-oil, no wax surfaces
Can Be Painted Over  Yes
How to Prep  Apply over any surface or top coat for desired effect except wax.
Cure Time  21 Days
Maintenance/ Cleaning  Gentle soap & water

 

FAQs

Can I mix Fusion Mineral Paint into the Crackled Texture?

No. The Crackled Texture works because it does not have a bonding agent – and Fusion does have that bonding agent. If you add Fusion into the Crackled Texture, you will not get cracks.

Can I use this over Fusion Mineral Paint?

Yes! If you put on a thick layer and get deep cracks, you may even see some of the base coat through the cracks.

Can I use Fusion Mineral Paint over this?

Absolutely! There are so many different ways to work with Crackled Texture and Fusion, check out these blog posts:

How do I make bigger, deeper cracks?

A thicker application of Crackled Texture will result in bigger cracks. Try to spread it only once, because the more you work with it, the smaller the cracks will be.
 

DIRECTIONS

Crackled Texture is made of the same high quality ingredients as Fusion Mineral Paint and will stick to almost anything Fusion does.  For larger, thicker cracks, apply a thick layer of Crackled Texture.  For smaller details, brush the product into a thin layer.

– Non-toxic

– No VOCs

– Easy to use

– Exceptional coverage

– Matte finish

– Easy way to obtain weathered, rustic look

– Does not need to be painted over

– Does not need a top coat – however may be recommended if using on a high traffic high water surface such as a coffee table. Any top coat like Tough Coat or Stain & Finishing Oil can be used.

 

HOW TO USE

Stir before using. Apply to a horizontal surface for best results. Apply an even layer with a spreading tool. This product is self-leveling. Tap to settle air bubbles. Thicker application will result in larger, more defined cracking. Spreading will result in smaller cracking. DO NOT MIX PAINT with this product or no cracking will occur. 

 

COLOURS

NO COLOURS AVAILABLE.

 

From Our Blog:

  • Create a Crackled Paint Effect



    Introducing Fusion's NEW Crackled Texture



    Looking for a way to create texture and depth in your piece?  Well we have just the product for that!  Introducing our NEW Crack…
    Read More