Painted Fabric Wing-Back Chair



with Fusion Mineral Paint in Cashmere





Share:

Painting Fabric may seem a little odd at first, but you really can have a statement chair on a budget by making an old tattered and worn out chair look brand new with some paint! It sounds bizarre we know but we have made over so many fabric chairs with excellent results and gives it gives a new life to an otherwise outdated piece of furniture. A painted chair won’t crack or feel rough if you follow the right steps! It should feel like leather once you’re done! So follow along for the step by steps of a Painted Fabric Wing-Back Chair with Fusion Mineral Paint in Cashmere.

old worn fabric chair

It’s worth giving painting fabric a try if it’s a good quality chair, with good bones, because upholstery is quite pricey!  Fabric colours and styles will trend, so adding a bit of paint is the perfect DIY for an inexpensive upcycle.  So we are going to paint the fabric and give it a whole new look! 

Cashmere board mood

 

MATERIALS USED:

Fusion Mineral Paint Cashmere

Pearl Wax

Spray bottle and water

Staalmeester Brush

 

Step 1:

To prepare the chair for painting, first give it a good vacuuming to remove any dust, make sure to get inside any crevices and under any cushions. Something to note, every fabric will take the paint slightly different. The tighter woven fabric, the better the overall feeling, while fabric like velvet and microfiber may be a tad trickier with their finished look and feel.

 

Brush stokes of Cashmere

Step 2:

To properly absorb the paint, it is best to wet the fabric first.  This helps the paint spread further and thinner. We used a spray bottle and sprayed the chair in sections.  

spraying the fabric chair

Step 3:

Mix 1 part paint with 1 part water for your first coat to absorb well into the fabric think of “dyeing” the fabric. Once dry, sand between coats and apply a second or third coat as needed, gradually working up to full strength paint for your last coat.

Step 4:

The final coat should be full strength paint, not watered down.  Allow this last coat to fully dry – this can take up to 12 hours depending on how many coats and layers and how thick the fabric was. 

 

Step 5:

This last step is not necessary but will give you a beautiful feeling finish. Apply a coat of Furniture Wax in clear to give it a soft smooth leather-like feel. Remove and buff off all excess wax prior to using the chair. 

waxing fabric

waxing fabric

Buffing wax off fabric

Statement Chair

We used Cashmere one of the new colours as it has a beautiful soft creamy neutral undertone. The original fabric had some raise embroidery detail which can still be seen through the paint. It took a total of 3 coats of paint and for a darker colour it would only take 2 coats, so it’s a very economical way to change a fabric chair  The waxing gives it a leathery look with a slight sheen and enhances any raised detail on your fabric. Such a great way to have a statement chair on a budget!

Would you try it now you have seen how easy it is to do? 

 

 



Jennylyn
Fusion
Mineral Paint